Furnace Repair Spruce Grove

Water leaks from your furnaces can be concerning and may be a sign of an issue that needs to be fixed right away to prevent costly repairs in the long run. Here is a closer look as to why this may be why you have a broken furnace that is leaking:

Condensation problems

As an outcome of combustion, water vapour is produced in furnaces. Water leaks could occur if there are problems with the condensate system.

Clogged condensate drain lines

Water may back up and seep out of the furnace if the condensate drain line gets clogged with dirt or debris.

Broken heat exchanger

Water leaks from the furnace may result from a fractured heat exchanger. Because it may potentially result in the emission of hazardous gasses, this is a significant problem that needs to be repaired right away.

Leaking flue pipe

The furnace’s flue pipe releases combustion fumes. Water may be able to escape the flue pipe if there are leaks or cracks.

Internal part flaws

Water leaks may result from problems with internal parts, such as the secondary heat exchanger or other heating system components.

It’s best to turn off your furnace and get help from a professional if you observe water seeping from it. Fixing complex issues on your own without the necessary expertise can result in further damage or safety hazards. To guarantee your furnace operates safely and effectively, a certified HVAC technician can identify the issue and suggest corrective measures that get your furnace back up and running.

There could be a number of reasons why your furnace is blowing chilly air rather than warm. These are a few typical reasons 

·  Temperature settings: Verify that the thermostat is set to “heat,” not “cool.” It’s possible that the furnace is blowing cold air because the thermostat was accidentally turned to the cooling setting.

·  Problems with the pilot light or ignition system: If your gas furnace isn’t lighting up, there may be a problem that keeps the burners from starting.

·  An air filter that is blocked or dirty: This can limit airflow, causing the furnace to overheat, shut off the burners and push out cool air.

·  Closed gas valve: Verify that the furnace’s fuel-supplying gas valve is completely open. When it’s closed, either entirely or partially closed off, the burners won’t light and heat the air.

·  Problems with ignition control: The ignition sequence must be started by the ignition control device. If it’s broken, the furnace cannot ignite the burners, releasing frigid air.

·  Motor failure: The motor is in charge of moving air around the system. It might not be dispersing warm air correctly if it’s broken.

·  Ductwork issues: Heated air may be wasted before it enters your living areas due to leaks or blockages in the ductwork.

In the event that the problem continues after you’ve adjusted the air filter and thermostat, you should get in touch with a local, qualified HVAC technician as soon as possible to book an appointment for a furnace repair in Spruce Grove.

A furnace may smell for a number of reasons, and the kind of scent it emits can reveal information about the root cause of the issue. Let’s take a closer look: 

• Burning dust: The furnace may burn off collected dust on the heating exchanger when you switch it on after an extended period of inactivity. This may result in a dusty or burned scent, but it’s usually not harmful.
• Musty or mouldy odour: The growth of mould or mildew can be caused by moisture present in the ducting or on the air filter. This may cause the furnace to run with a mouldy or musty smell. The smell can be eliminated by looking for and resolving any moisture sources, as well as by replacing or cleaning mouldy parts.
• Gas odour: A gas leak may be detected if you smell something like rotten eggs. Gas leaks pose a major risk to your safety. In the event that you believe there is a gas leak, leave the area right away, phone the gas company, and dial 911.
• Electrical odour: An electrical odour, such as burning or hot metal, may indicate that there is a problem with one or more electrical parts. This could be caused by an overheating component, a broken motor, or potential problems with the electrical portions of your unit.

You should take immediate action to resolve any strange or lingering smells coming from your furnace. Foul odours can be avoided and identified with the help of furnace tune ups, which includes changing or cleaning air filters and hiring professionals to do inspections. Seek assistance from a licensed HVAC professional if you are still determining the source of the odour or whether it poses a safety risk.

A noisy furnace can be annoying and could be a sign of several problems with the heating system. The following are some typical causes for loud noises coming from a furnace:

• Clogged or dirty burners: Debris, dust, or dirt on the burners might result in poor combustion, which can produce loud noises like a rumbling noise.
• Unsecured or loose ductwork: Vibrations and noises can travel throughout the system if your air ducts are not correctly fastened or if any parts are loose.
• A malfunctioning or worn-out blower motor: The blower motor is responsible for moving air around the system. It may make loud noises like grinding, shrieking, or rattling if it has become worn out or malfunctions.
• Lack of grease: Excessive friction and noisy operation might result from poorly greasing moving parts, such as the fan and blower motor.
• Blocked or dirty air filter: A congested or dirty air filter can impede airflow, which will make the furnace work harder and make more noise.
• Problems with the belt: If the blower motor in your furnace is belted, noises like shrieking or screeching may come from a loose or worn-out belt.
• Difficulties with ignition: Sounds like popping or banging may be caused by malfunctions in the ignition system, such as delayed ignition or recurrent efforts to light.
• Gas burners that are malfunctioning or dirty: Debris or dirt buildup on the burners might result in uneven burning and loud noises. Moreover, the burners may make popping or banging noises if they are misplaced or not working correctly.
• Noises associated with expansion and contraction: When the furnace operates, its parts expand as it heats up and contracts as it cools down. There are instances when this normal process makes popping or clicking noises. Loud or excessive noises, however, could be a sign of trouble.