Air Conditioner Repair Red Deer

There may be a number of reasons why your hvac system isn’t efficiently cooling your home. Let’s take a closer look at some of these reasons in more detail below: 

·  Unclean or clogged air filter: A dirty or blocked air filter can impede air circulation, which lowers your air conditioner’s cooling capacity.

·  Problems with the refrigerant: A refrigerant leak or low levels can cause less cooling ability.

·  Thermostat settings: If your home’s thermostat is set incorrectly, the air conditioning unit may not cool down to the recommended level.

·  Restricted or blocked airflow: Air movement might be determined by clogged or congested air ducts, registers, or vents, which makes it more difficult for the air conditioner to chill your home.

·  A dirty condenser or evaporator coils: As contaminants and dirt build up over time, the condenser and evaporator coils’ capacity to collect and release heat is diminished.

·  Compressor failure: The compressor is an important part that compresses and distributes refrigerant to promote heat exchange. The cooling capacity may be impacted if the compressor isn’t always working properly or correctly.

·  Electrical issues: The functioning of the air conditioning unit may be impacted by electrical difficulties such as a malfunctioning capacitor or wiring faults.

·  Unit size: Your cooling system may have trouble keeping the room at a suitable temperature if it is too small for the area it must cool.

·  Problems with the ducting: Cooled air may escape through leaks, gaps, or inadequately insulated ducting before it reaches its destination.

If your hvac system system isn’t cooling your home, reach out to Romaniuk Heating and Air Conditioning to book a repair appointment in Red Deer with one of our HVAC technicians today.

Your air conditioner may be making an unusual and loud noise, which could be a sign of several problems. Determining the kind of sound and its potential sources can aid in problem-solving and troubleshooting. Here is a closer look:

·  Clanking or banging sounds could be an indication of a broken or loose part in the compressor or other components.

·  A slipping or worn-out belt may be the cause of a high-pitched squealing noise.

·  Parts that are loose or unfastened, including panels, bolts, or screws, may make a rattling noise. 

·  Sounds like clicking could indicate an electrical problem, like a broken thermostat or a glitch in the control system.

·  There could be problems with the electrical components, debris in the outdoor unit, or loose mechanical parts causing a buzzing sound.

·  Refrigerant leakage may be indicated by whistling or hissing noises.

·  A grinding sound could indicate a compressor issue or an issue with the motor bearings.

·  Temperature variations can cause ductwork to expand and contract, making popping or snapping noises.

If the noise coming from your hvac system seems out of the ordinary, we advise you to switch it off and not use it again until the problem is repaired by a professional HVAC technician.

If your air conditioner won’t stop cooling, it could be due to several reasons. Here are some common issues that could be causing this to happen:

·  Thermostat settings: Check that the temperature you want is correctly set on your thermostat. The air conditioner will keep cooling until the temperature is reached if the thermostat is set too low.

·  Thermostat malfunction: An inaccurate thermostat may fail to provide a signal to switch off the air conditioning or may fail to sense the temperature.

·  Problems with the sensor: The thermostat sensor, which is situated beneath the control panel, could be contaminated or broken.

·  Refrigerant levels: Your air conditioner system may be compromised by improper refrigerant levels. A refrigerant overflow could lead to the system overcooling.

·  Contactor malfunction: The contactor is a switch that regulates the compressor’s electricity supply. The compressor may continue to run even though it shouldn’t if the contactor is broken or jammed in the closed position.

·  Stuck relay switch: The air conditioning may also keep running if there is a stuck relay switch in the control board.

·  Short cycling: Numerous problems, including an oversized unit, low coolant, or a broken thermostat, maybe the cause of short cycling.

·  Problems with the capacitor: The compressor may operate nonstop if the capacitor is malfunctioning.

Troubleshooting air conditioner problems can help you identify simple issues before calling a repair technician to remedy the issue. Here is a complete step-by-step to help you troubleshoot common cooling problems:

1. Check your thermostat: Verify that the thermostat is at the temperature you want and in cooling mode. If the thermostat is powered by batteries, change the batteries.

2. Look at the air filter: Reduced airflow and lowered cooling efficiency can be caused by an unclean or clogged air filter. In case the air filter is dusty, check it and replace it.

3. Check the circuit breaker: Make sure the electrical panel’s circuit breaker hasn’t tripped by checking it. Reset it if it has, then keep an eye on your air conditioner and how it operates. 

4. Examine the registers and vents: Ensure that all registers and vents are open and unobstructed. Vents that are blocked can limit airflow and have an impact on cooling efficiency.

5. Listen for odd noises: Keep an ear out for any strange or loud noises that the air conditioner may be making. Specific errors, such as loose components, refrigerant leakage, or motor troubles, may be signalled by different noises.

6. Examine the drain for condensation: Make sure there are no obstructions in the condensate drain tube. Both water damage and reduced AC performance can result from a clogged drain.

7. Check for ice accumulation: Problems with airflow or refrigerant levels may be the cause of any ice accumulation you see on the evaporator coils. Turn off the air conditioning and let the ice melt.